Custom power boards · equipment · system design

Clean power. Built to fit your system.

VoltCraft designs and bench-builds organized power systems for RVs, fishing and hunting shacks, farms, work vehicles, cabins and remote applications. Every board is laid out around your loads, battery bank and charging sources—not a generic kit.

  1. 01
    Designed firstLoads, charging and protection mapped before parts are mounted.
  2. 02
    Bench-built cleanShort cable paths, labeled connections and serviceable layouts.
  3. 03
    Ready to integrateA finished power core for your customer or qualified installer to connect.
Actual VoltCraft power board with inverter, solar charging, battery chargers, monitoring, disconnects, fusing and bus distribution Actual VoltCraft build
Designed, laid out and wired as one system. Real VoltCraft work — not a stock illustration.
Applications
RV · Shack · Farm · Mobile · Remote
System Voltages
12V · 24V · 48V
Core Components
Solar · Inverter · DC‑DC · Distribution
Handoff
Labeled · Configured · Documented
What VoltCraft does now

We build the power core. You integrate it.

The business is intentionally focused on custom board fabrication, system design and equipment supply—not on-vehicle RV installation or repair.

Custom Power Boards

Pre-arranged boards built around your battery bank, solar, inverter, charging sources and DC distribution needs.

  • Bus bars, shunts, disconnects and fusing
  • MPPT and DC-DC charging
  • Inverter / charger layouts
  • 12V accessory distribution
Power boards

Equipment Supply

Need the pieces rather than a full board? VoltCraft can source and supply compatible components for a new build or upgrade.

  • Victron-focused systems
  • Blue Sea protection & distribution
  • Renogy and other proven components
  • Cable, lugs, fuses and disconnects
Equipment

System Design

We translate your loads and charging sources into a practical architecture so the board is sized around how you actually use power.

  • Load and runtime review
  • Battery and inverter sizing
  • Solar / charging strategy
  • Connection and protection plan
How it works
Real VoltCraft builds

See the difference a planned layout makes.

These are actual VoltCraft power boards. The component mix changes from project to project, but the goal stays the same: clean routing, logical protection and a layout that can be understood later.

Architecture before hardware

The finished board starts with the power path.

The real builds above are the result. This interactive example shows the thinking behind them: charging sources, battery protection, distribution and loads are mapped before the board is fabricated.

Switch the charging sources and voltage to see how a typical system architecture changes. Your project is sized around its actual loads, battery bank, charging sources and available space.

See the build process
Example system architecture
Example VoltCraft power board architectureSolar panels feed an MPPT charger, a vehicle alternator feeds DC to DC charging, shore or generator power feeds an inverter charger, and all sources support a lithium battery bank feeding fused DC distribution and AC loads.MAIN DC DISTRIBUTIONFUSED HIGH-CURRENT BRANCHESINVERTER/ CHARGERAC IN · CHARGE · INVERTMPPTSOLAR CHARGERDC-DCALTERNATOR CHARGERDISCONNECTCLASS-TFUSESHUNTMONITORFUSE BLOCKBRANCH CIRCUITSVOLTCRAFTEXAMPLE ARCHITECTURESYSTEM12VILLUSTRATIVEONLYBATTERY BANKLiFePO4 · 12VDC LOADS120V AC LOADS

12V system · charging from solar + alternator + shore / generator

Quote this setup
Solar / charging inputBattery / DC positive120V ACNegative / shunt path

Switch the sources and voltage to see the power path change. Illustrative architecture only — every VoltCraft board is sized and laid out for the actual application.

The VoltCraft standard

Built like a system, not a pile of parts.

Every project starts with the architecture. Component selection, cable paths, protection, serviceability and future expansion are considered before the first part is mounted.

  • Purposeful layoutShort, clean high-current paths and logical component placement.
  • Protection firstAppropriate disconnects, overcurrent protection and distribution built into the board concept.
  • Documented handoffConnection points, fuse information and relevant configuration notes supplied with the finished build.
Example build profileBench build
Battery bank
12V / 200–400Ah LiFePO4
Solar charging
Victron SmartSolar MPPT
DC-DC charging
Orion XS / application dependent
Distribution
Lynx / bus bars / fused branches
Monitoring
SmartShunt / BMV / GX-ready
Inverter
Optional inverter or inverter/charger

Example only. Every project is sized and configured around the actual application.

  • Victron Energy
  • Blue Sea Systems
  • Renogy
  • Class-T / MEGA Protection
  • LiFePO4 Systems
  • Marine-Grade Cable & Lugs
Important scope note

VoltCraft supplies equipment and builds standalone power boards. We do not perform RV service, diagnostics, or installation into recreational vehicles. Final installation, connection to existing systems, and any work requiring a regulated trade, permit or inspection remains the responsibility of the customer and/or an appropriately qualified installer.

Have a project in mind?

Tell us what you need to power, how you plan to charge, and where the board will live. We’ll turn it into a clean, buildable system.

Request a Build Quote
Call Request a Build Quote